This morning I finally had time to breathe and catch up on everything.
I fired up the sim on the gate at PANC where I finished my last flight and loaded the PMDG NGX that I had flown and loaded the final fuel figure.
Started MyAAS2 fine and it recognised I had a flight in progress. I resumed the flight and it appeared in the flightboard. I ended the flight and was given the option to PIREP it which I did.
Went to the PIREP page Tom posted and there were no flights to PIREP.
Refreshed my flights in MyAAS2 and it found nothing.
Went to my Scheduled Division plan book and the flight is still there.
The .db file is only 1k and has a file date of the time I resumed the flight and clicked on PIREP.
Fired up MyAAS2 on the laptop (another instance) and flight is available there and shows as not yet started.
Reading the WIP Manual it states:
10. When at your arrival gate/pad, click on Menu->End Flight. This will save your flight
results into the program database.
11. (Back at the main window) Select File->Upload Flights... This will upload your
completed flights to the Air-Source database.
12. Select File->Pirep Flights. This will send you to the web-page where you can finish the
flight reporting process
After completing step 10, MyAAS2 closes. If I don't have any flights planned and the refresh shows no flights, I can't get back in to MyAAS2 to complete steps 11 and 12.
Mark