MyAAS

[TheDude71]

Afternoon gents.

I have downloaded MyAAS, but can not seem to figure it out. I have looked on the web site for insrtuctions, but only found install instructions.

Is it possible to get a quick "how to" to get this program running. Am I right by saying it looks like I need a saved flight in order to us MYAAS?? Or when I set a scheduled flight, where do i save these to use MYAAS.

Thanks for any help!!

[vic365]

Brett, we'll skip step 1 (Install MyAAS)
2. You must have booked flights at AirSource to use MyAAS...either Bids, Scheduled or ASHA flights.
3. Open MyAAS and go to FILE.
4. Select "download pre-booked flights"
5. A window will open listing all your booked flights (from all divisions).
6. Select the flight (or flights) you wish to download (one at a time).

You can stop here, if you wish, and use the flights at a later time or continue...

7. Now click MyAAS "FILE" again and choose "Load locally saved flight"
8. From the window that opens select the ONE flight you are going to fly.
9. The MyAAS window will now populate with your selected flight's info.
10. Click START when you want to begin recording time.
11. Click STOP when you are done flying.

At this point MyAAS has saved your flight time for this flight. You can resume flying (if you were not done) later or you can PIREP...

12. Select File and "Pirep locally saved flight".
13. Select the flight you wish to pirep from the list.

It should be painless after that.

[AS 2 Tom Little]

Thanks for the quick reply! You beat me to it, besides it's good to have a write-up for how-to on MyAAS. Even though it started as a very basic program, it is growing just a bit more complex for each major update.

[vic365]

That's what I like about AirSource...you usually can get help from the "general population". sounds like prison "speak"

[TheDude71]

Ok here is what I get, I open MyAAS, the online box is checked, click on fie and click on Download preload flight and I get this error. Here are some shots. What am I doing wrong??










This is the error code:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.IO.FileNotFoundException: Could not load file or assembly 'Interop.SHDocVw, Version=1.1.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.
File name: 'Interop.SHDocVw, Version=1.1.0.0, Culture=neutral, PublicKeyToken=null'
at MyAAS.Download.Form1_Load(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].



************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4200 (NetFxQFE.050727-4200)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
----------------------------------------
MyAAS
Assembly Version: 1.0.1.3
Win32 Version: 1.0.1.3
CodeBase: file:///D:/FS9/Utilities/MyAAS.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

And I

[TheDude71]

Disregard last post. after playing with it, I had to download the latest version, go into the file it made and drop the .exe file in the folder, then I ran the updateASS and whaala, it worked.

thanks for the help fellas!!

[TheDude71]

Ok, I hope this thread can help anyone having problems with MyAAS. So as you can see I had problems with the install. After I thought it was running, I was wrong. The error I was getting was this after about 10 sec of the program running:

Could not load file or assembly 'MySql.Data, Version=1.0.7.30072

After researching this error, I found the fix and here it is:

http://download.softagency.net/MySQL/Downloads/Connector-Net/mysql-connector-net-1.0.7.zip

Run this and it will install itself. After doing that, It looks like I am in business. Been running MyAAS for 17 minutes and no error codes.

Kind of a pain in the ass fellas, but if any other pilots are interested in running this program instead of AAS I hope this will help you!!

Now I too have the blue monitor...YAHOO!!