ASHA to the rescue in New Zealand

Have a nice picture in FS you wish to share? Post and upload your Flight Simulator Screenshots in the AirSource Gallery (link on top of all AirSource website pages or inside the announcement of this forum)

ASHA to the rescue in New Zealand

Postby AS380 Mark Richards » 20 Jan 2007 03:25

This afternoon I was flying an RNZAF C-130 Hercules from Gisborne to Ohakea via the coast at 8,000 feet on a routine ASHA Flight. I was flying online on the VATSIM Network.

As I was overhead the Palmerston North VOR about to join left base for RWY27 at Ohakea, I heard a PAN call from a Beech 1900D en route from Nelson to Palmerston North following a warning about "Pressure Danger Level" and he declared that he was diverting to Paraparaumu. He happened to be another Air Source pilot but I won't divulge who, now will I Jason?

Being the thoughtful ASHA Pilot I am, I aborted my approach and put the throttles to the firewall and headed over to escort him and be available to drop a lift raft if necessary. I met up with just over Kapiti Island but being the skillful pilot that he is, he managed to land on RWY34 at NZPP without further incident.

Fortunately I had an RNZAF photographer on board who managed to record the action as it unfolded:

1. Along with FASTJET34, we depart Palmerston North to intercept the crippled aircraft

Image

2. My Herc low level past the Tararua Ranges heading for the intercept.

Image

3. We sight the aircraft just south of Kapiti Island.

Image

4. The view from the flight deck as we turn to follow him in.

Image

5. Banking around as he lines up for finals RWY34.

Image

6. I'm leveling out to escort him as my observers monitor his progress

Image

7. Level with him on his final descent

Image

8. I'll stay high as he approaches in case we need to radio for assistance

Image

9. He's on short finals and all looks good.

Image

10. Touchdown safely!

Image

11. I'm climbing out again for RNZAF Ohakea as he taxis in, safe and sound.

Image

Another successful mission complete!

User avatar
AS380 Mark Richards
FAA [Administrator]
 
Posts: 1578
Joined: 29 Nov 2005 11:55
Location: [AirSource ID: AS 380] Auckland, New Zealand [NZAA]
AirSource Pilot Number: 380

Postby Brandon Stoll » 20 Jan 2007 04:42

Nice job! Very nice ground scenery you have, I'm jealous. What do you use? I'd use VATSIM, but I can never get it to work for some stupid reason. It just crashes FS for me. I'm probably going to be getting Radar Contact in the near future, I'm so bored of MS ATC. Nice job though, excellent shots.
Brandon Stoll
 

Postby serdarbadoglu » 01 Feb 2007 22:44

Great shots of a great aircraft. 8)

User avatar
serdarbadoglu
Student Pilot
 
Posts: 28
Joined: 02 Jan 2007 17:04
Location: [AirSource ID: AS 504] Ankara, Turkey
AirSource Pilot Number: 0

Postby AS 506 Jay Kae » 02 Feb 2007 08:10

Wow that is soooo cool !! Almost looks like VOZ textures there Mark, I'd be interested to know what you are using indeed :)

User avatar
AS 506 Jay Kae
Instrument Rated Pilot
 
Posts: 203
Joined: 07 Dec 2005 06:40
Location: [AirSource ID: AS 506] Australia
AirSource Pilot Number: 0

Postby AS380 Mark Richards » 02 Feb 2007 11:24

AS 506 Jay Kae wrote:Wow that is soooo cool !! Almost looks like VOZ textures there Mark, I'd be interested to know what you are using indeed :)

NZ 20m terrain mesh VOZ'd to SE.

User avatar
AS380 Mark Richards
FAA [Administrator]
 
Posts: 1578
Joined: 29 Nov 2005 11:55
Location: [AirSource ID: AS 380] Auckland, New Zealand [NZAA]
AirSource Pilot Number: 380

Postby AS 506 Jay Kae » 02 Feb 2007 21:11

As I suspected :) Thanks for confirming Mark :)

User avatar
AS 506 Jay Kae
Instrument Rated Pilot
 
Posts: 203
Joined: 07 Dec 2005 06:40
Location: [AirSource ID: AS 506] Australia
AirSource Pilot Number: 0


Return to Flight Simulator Screenshot Forum

Who is online

Users browsing this forum: No registered users and 105 guests